Zpět Tennis
Tennis
Surfaces not only for leisure-time players, but for professionals as well.
The line is represented by:
-
artificial lawns topped with silica sand or combination of the sand and EPDM granulate, or without topping
-
single-layer elastic surfaces consisting of EPDM rubber granulates
-
surface on the basis of flexible acrylate, ITF - classified
-
artificial surface with clay characteristics, classified by ITF category 1

Certified for DIN 18035/6: Type C, attested according to IAAF
Single-layer PUR/EPDM surface, water permeable.
High quality elastic surface, designed for multi-purpose outdoor sport fields, ideal for tennis courts and school athletic tracks, thick. 10 mm
Composition
Elastic layer, applied directly on site using a special finisher, with thickness of 10 mm. It consists of polyurethane bonding agent and EPDM full-colour granulate (rubber resistant to all and any weather influences).
Requirements
Level values according to standard +- 2 mm per 2 m. Ideally drainage asphalt carpet. Alternatively asphalt ABJ impermeable or concrete. (Mainly in case of smaller areas. Gradient setting 0,5 - 1 % from one side of the playground to the other side. Surface water de-watering to a spout or a channel with grid.
Application
The asphalt or concrete base is penetrated. Then, there is prepared a mixture of EPDM granulate with fraction 1 - 3 mm and polyurethane bonding...
Více informací
Artificial lawn with silica sand topping and EPDM (natural rubber) granulate for tennis grounds.
Description
Number of stitches per 1 m2: approx.60 000 Weight per 1 square meter without silica sand: approx.2,4 kg Material: 100% polypropylene (UV stabilized) Fibre height: 10 mm
Requirements
Level values +- 4 mm per 2 m. Asphalt carpet or smoothed concrete area. Gradient setting 0,5 - 1 % from one side of the playground to the other side. Surface water de-watering to a spout or a channel with grid. It is possible to use drainage asphalt carpet. Gradient setting 0%.
Application
Artificial lawn is freely distributed on prepared surface - the lawn is supplied in rolls made to measure directly from the production plant. These parts are applied one next to the other and the connection is sub-glued. Then, cutting of playing lines follows. Finally, the whole area is topped with silica sand , that must be put - using a brush - approximately to 40 - 50% of the...
Více informací
Artificial lawn with silica sand topping designed mainly for tennis lawns. It can be used for any other ball games.
Description
Number of stitches per 1 m2: approx.44 000 Weight per 1 square meter without silica sand: approx.2,3 kg Material: 100% polypropylene (UV stabilized) Fibre height: 15 mm
Requirements
Level values +- 4 mm per 2 m. Asphalt carpet or smoothed concrete area (Gradient setting 0,5 - 1 % from one side of the playground to the other side. Surface water de-watering to a spout or a channel with grid. It is also possible to use the drainage asphalt carpet Gradient setting 0%.
Application
Artificial lawn is freely distributed on prepared surface - the lawn is supplied in rolls made to measure directly from the production plant. These parts are applied one next to the other and the connection is sub-glued. Then, cutting of playing lines follows. Finally, the whole area is topped with silica sand , that must be put - using a brush - approximately...
Více informací
Artificial lawn with silica sand topping designed mainly for playgrounds with combined operation of tennis – small football. It is suitable even for other ball games.
Description
Number of stitches per 1 m2: approx.39 500 Weight per 1 square meter without silica sand: approx.2,2 kg Material: 100% polypropylene (UV stabilised) Fibre height: 18 mm
Requirements
Level values +- 4 mm per 2 m. Asphalt drainage carpet or smoothed concrete surface, respectively water permeable sub-base of stone crushes. Gradient setting 0,5 - 1 % from one side of the playground to the other side. Surface water de-watering to a spout or a channel with grid. It is possible to use drainage asphalt carpet Gradient setting 0%.
Application
Artificial lawn is freely distributed on prepared surface - the lawn is supplied in rolls made to measure directly from the production plant. These parts are applied one next to the other and the connection is sub-glued. Then, cutting of playing lines...
Více informací
Classic Clay is classified by ITF in the category 1
Artificial tennis surface Classic Clay was newly classified by ITF in the category 1 as slow surface. The test proved that characteristics of the surface Classic Clay approach the characteristics of clay surface.
Surface for indoor (e.g. overpressure halls) and outdoor (e.g.. tennis complexes) activities, that may be used practically under any weather conditions.
What is it Classic Clay? Australian artificial tennis surface that is very similar and that has similar characteristics for the game as clay. The ball take off is very similar and the surface allows the players the same slipping as in case of playing on classic clay.
Description
Material – fibrillated polypropylene highly resistant to weather and UV radiation influences, total height of the mat – 15 mm including filling, colour - brick red, filling – colour silica sand with oval grains, lining – inserted white lines
Requirements
Level values +-...
Více informací