Porplastic SW

Certified for DIN 18035/6:Typ D, certificate IAAF. Elastic layer of PUR/recycled granulate, and pore-closing layer and poured layer topped with colour granulate EPDM, water impermeable . Running tracks in competition and top-performance sport, high quality sport surfaces, thick. 13 - 17 mm Composition Elastic layer, applied directly on site using a special finisher, with thickness of 10 - 13 mm. It consists of polyurethane bonding compound and granulate of recycled rubber, fraction 1 - 4 mm and PU cement layer. A layer of PU bonding agent with EPDM granulate, fraction 1 - 4 mm. Requirements Level values according to standard +- 4 mm per 4 m. Asphalt carpet, concrete. Gradient setting 1 % - 2% from one side of the track (area) to the other. Application The asphalt base is penetrated. Then, there is prepared a mixture of recycled granulate with fraction 1 - 4 mm and polyurethane bonding agent. The mixture is applied in front of the finisher that performs...Více informací

Porplastic SB

Certified for DIN 18035/6: Type A, certificate IAAF. Structured sprayed layer, water permeable. Running tracks, play grounds, ideal even for re-vitalisation and re-topping, thick. 13 mm. Composition Elastic layer, applied directly on site using a special finisher, with thickness of 10 mm. It consists of polyurethane bonding compound and granulate of recycled rubber, fraction 1 - 4 mm. Upper spray-on : mix of PU bonding compound EPDM granulate, fraction 0,5 - 1,5 mm. (3 mm) Requirements Load-carrying layer: Level values according to standard +- 2 mm to 2 m. Drainage asphalt carpet. Gradient setting 0,5 % - 1 % from one side of the playground to the other side. Surface water de-watering to a spout or a channel with grid. Application The asphalt base is penetrated. Then, there is prepared a mixture of recycled granulate with fraction 1 - 4 mm and polyurethane bonding agent. The mixture is applied in front of the finisher that performs installation of the base...Více informací

Porplastic M olympic

Certified for DIN 18035/6:Typ E, certificate IAAF. Massive one-layer or two-layer poured surface connected by PUR topped with colour granulate EPDM, water impermeable. Running tracks for international competitions and top-level sport, thick. 13 – 18 mm Composition Elastic layer, applied directly on site using a special finisher, with thickness of 2 x approx. 5 mm. It consists of polyurethane colour bonding agent and granulate of recycled rubber, fraction 1 - 4 mm and PU cement layer. A layer of PU bonding agent with EPDM granulate, fraction 1 - 4 mm. Requirements Level values according to standard +- 4 per 4 m. Asphalt carpet, concrete. Gradient setting 1% - 2% from one side of the track (area) to the other one. Application The asphalt base is penetrated. Then, there is prepared a mixture of recycled granulate with fraction 1 - 4 mm and polyurethane bonding agent. The mixture is applied in front of the finisher that performs installation of the base...Více informací

Porplastic EP

Certified for DIN 18035/6: Type C, attested according to IAAF Single-layer PUR/EPDM surface, water permeable. High quality elastic surface, designed for multi-purpose outdoor sport fields, ideal for tennis courts and school athletic tracks, thick. 10 mm Composition Elastic layer, applied directly on site using a special finisher, with thickness of 10 mm. It consists of polyurethane bonding agent and EPDM full-colour granulate (rubber resistant to all and any weather influences). Requirements Level values according to standard +- 2 mm per 2 m. Ideally drainage asphalt carpet. Alternatively asphalt ABJ impermeable or concrete. (Mainly in case of smaller areas. Gradient setting 0,5 - 1 % from one side of the playground to the other side. Surface water de-watering to a spout or a channel with grid. Application The asphalt or concrete base is penetrated. Then, there is prepared a mixture of EPDM granulate with fraction 1 - 3 mm and polyurethane bonding...Více informací